FORMWORK PRODUCTS

Tie Bar/ Dividag Bar      15mm / 20mm / 26.5mm/ 32mm available  

Tie Bar is produced from high tensile steel with a screw thread ( deformation conforming to ASTMA 618 for reinforcing steel bars ). Available in 15mm , 20mm, 26mm and 32mm options.Associated ancillary products such as thruty sleeves , thruty cones , wing nuts , waler plates, and tie bar connectors are available.​

​Price       15mm Dividag Tie Bar​       1500mm​        £  9.95 per length​
​Price       15mm Dividag Tie Bar​       3000mm​       £ 18.50 per length​
​Price​       15mm Dividag Tie Bar       6000mm​       £ 36.90 per length​
​Price       20mm Dividag Tie Bar​       6000mm​       £ 48.95 per length​
​Price       26mm​ Dividag Tie Bar       6000mm​       £ 93.65 per length​


Tie Bar Connectors         15mm / 20mm / 26mm available

Tie Bar Connectors are used to join the rods complete with centre stop to ensure equal spacing inside the connector. The connectors are available for next day delivery if ordered before 2.30pm.

​Price       15mm Tie Bar Connectors​       30 x 150mm​       £ 4.25/each​
​Price       ​20mm Tie Bar Connectors       40 x 135mm​       £ 6.95/each​
​Price       26mm​ Tie Bar Connectors​         Available       £ Call for Price​


Thruty Sleeve / Tie Rod Sleeve    20mm / 22mm & 26mm available

Thruty Sleeve is a rigid PVC tube of 2mm wall thickness, supplied in 2 metre lengths, which can be easily cut to the required size. It is used as an expendable sleeve over tie bolts, facilitating their removal and also acting as a spacer to ensure correct width .  The 20mm and 22mm sleeves are packed in 50 x 2 metre lengths  giving a 100 mts per pack , the 26mm sleeves are packed in 25 x 2 metre lengths , giving 50 mts per pack.                                                                                             

​Price      22mm Thruty Sleeve Tubing​       50 x 2 metre lengths per  pack​       £    72.50​/pack
​Price      26mm Thruty Sleeve Tubing​       50 x 2 metre lengths per pack​       £ 132.50 /pack​
​Price      32mm Thruty Sleeve Tubing​       50 x 2 metre lengths per pack​       £ 162.50/pack​

Thruty Cones / Tie Rod Cones  20mm / 22mm/  26mm / 32mm available

Thruty cones are used at the ends of the thruty sleeve and can be easily extracted after removal of the formwork, to form a chamfered recess for subsequent grouting  with Tie Hole Sealer.

​Price           20mm Thruty Cones​          500 per pack​          £ 34.50 per pack​
​Price           22mm Thruty Cones​          500 per pack​          £ 58.00 per pack​
​Price           26mm Thruty Cones​          250 per pack​          £ 61.00 per pack​

Wing Nuts / Tie Bar Nut     For securing tie rods in Formwork

A knock-on wing nut used in conjunction with waler plates for securing the bar in formwork applications. Wing Nuts to be used in conjunction with 15mm Tie Bar, 22mm Plastic Sleeving, Tie Bar Cones and Waler Plates. These components complete the Tie Bar Formwork System.

Price​       Wing Nut / Tie Bar Nut​       15mm​       ​£  2.15/each
​Price        Wing Nut/ Tie Bar Nut​       20mm​       £  3.85/each​
​Price        Wing Nut/ Tie Bar Nut​       26mm​       £  7.95/each​

Waler Plates / Tie Bar Plates     For use on Formwork Applications

Pressed Waler Plates are used for timber or steel walings in conjunction with a winged nut or a hex nut for load transfer. The embossing of the plate increases its rigidity. Load capacity depends on the contact area, the admissible bearing pressure and the threadbar that is used. Waler Plate to be used in conjunction with 15mm Tie Bar, 22mm Plastic Sleeving, Tie Bar Cones and Wing Nuts. These components complete the Tie Bar Formwork System.

​Price       Waler Plates​          15mm​          £  3.41/ each​
​Price       Waler Plates​          20mm​          £  4.96 /each​
​Price       Waler Plates​          26mm​          £ 11.15/each

Weldable Anchors/ Hex Nuts / Waterbarrier Nuts 

Hex Nuts - 15mm/20mm/26mm - used as an alternative to wing nuts when access is restricted

Weldable Anchors -  15mm/20mm -  A forged anchor which can be welded to structural steel, sheet piling etc. Anchors must be welded continuously all the way round. Load test should be conducted before use.

Waterbarrier Nuts - 15mm/20mm  - For use in water retaining structures. They are cast into the concrete wall between two seperate tie bars. After the concrete pour, the tie bars are removed leaving the water barrier nut in-situ.

Also available - Rock Anchors / Form Anchors / Cast In Anchors / Plastic Anchors

Please Call 0800 047 6775 for price

Chamfer Edge Profile     Used for Beams Columns & Walls 

An extruded plastic section for forming chamfered corners to columns and beams and features such as those on expansion joints on walls. The optional nailing flange provides easy fixing to corner moulds and safe stripping thus ensuring maximum re-use.

We also supply rounded edge chamfer profiles , steel chamfer profiles ( from 10mm to 30mm ) and magnetic chamfer profiles both single and double sided ( from 10mm to 30mm ). 

​Price       20mm Plain Chamfer Edge Profile​       100mt pack​       £  62.59/pack​
​Price       25mm Plain Chamfer Edge Profile​       ​100mt pack       ​£  82.00/pack
​Price       30mm Plain Chamfer Edge Profile​       100mt pack​       £  96.00/pack​
​Price       15mm Flanged Chamfer Edge Profile​       100mt pack​       £  68.95/pack​
​Price       20mm Flanged Chamfer Edge Profile​       100mt pack​       £  86.55/pack​
​Price       25mm Flanged Chamfer Edge Profile​       100mt pack​       £112.00/pack​

Voidformers    3 mt lengths Re-usable PVC  

Void formers are made from rigid PVC and are used to form grooves in concrete that can easily be fixed by nailing directly onto shuttering. Designed to withstand expected site conditions, they can be re used several times. The slight tapered shaping stops the void former from adhering to the concrete and therefore allows easy removal to provide a clean void.

​Price       20mm x 10mm Void Former​       60mt packs​       ​£   82.00/pack
Price       20mm x 20mm​ Void Former       ​60mt packs​       £ 139.00/pack
​Price       25mm x 12mm Void Former​       60mt packs​​       £ 113.00/pack
​Price       25mm x 25mm Void Former​       60mt packs​       ​£ 171.20/pack

Groutcheck Foam     For sealing joints in Formwork

A foam tape with pressure adhesive on one side. Suitable for sealing joints in formwork which are inaccessible for application of shutter tape such as butt joints.

​Price       Groutcheck Foam​       12mm x  6mm​ x  10mt roll       ​£ 12.50 per roll
​Price       Groutcheck Foam​       12mm x 24mm x  5mt roll​       £ 14.35 per roll

Groutcheck Tape / PVC Tape   PVC Tape for Covering Joints in Formwork

A specially developed matt finish waterproof pressure-adhesive PVC tape for use on all types of concrete formwork. Excellent adhesion even where residual release agent is present on form face.

​Price       Groutcheck PVC Tape​         50mm x 33mt roll​       £ 4.85/roll​
​Price       Groutcheck PVC Tape​         75mm x 33mt roll​       £ 6.50/roll​
​Price       ​Groutcheck PVC Tape       100mm x 33mt roll​       £ 8.42/roll​

Aquaplugs / Rubber Stoppers/ Tie Hole Fillers 

 The Tie Bar is inserted through the Tie Bar Sleeving and Tie Bar Cone. The Waler Plates are secured to the outside of the formwork using the Wing Nut. The Tie Bolt Cones can be removed once striking of the formwork has taken place and the hole filled with the Formplug to produce a watertight repair to the surface of the finished concrete.   A flexible tight fitting plug for internal sealing of plastic sleeve prior to filling with tieplug filler.

Price       Aquaplug Rubber Stoppers​       500 per pack​       £ 59.45/pack​
​Price       Aquaplug Rubber Stoppers​       500 per pack​       £ 68.56/pack​
​Price       Aquaplug​ Rubber Stoppers       250 per pack​       £ 67.40/pack​

Surface Retarders    Top Face for Fresh Concrete  -  Mould Face for Shuttering

A non-inflammable pigmented retarder designed to produce an exposed aggregate surface which gives an excellent key for subsequent concreting or surface treatments. Ideal for construction joints and rendering application . Retarders are used mainly for two purposes:  1. Expose the aggregate to give a decorative finish to the exposed surface. 2. To provide a keyed surface for joining subsequent cast panels together without the need for scabbing or scarification. Our retarders are supplied in two forms: liquid (horizontal surfaces) and wax (vertical applications).

​Price       Ecotard MF Mould Face Retarder​       25lt drum​       £   99.86/each​
​Price       Ecotard  TF​ Top Face Retarder​       25lt drum       £ 122.00/each

Also available Safetard Gel ( Mould face )  &  Safetard Liquid  ( Top face )

Mould Release Oil   Used on Metal , Timber and Formwork materials

Mould Oil is a blend of bio-degradable oils emulsified in water and is designed for use in general site operations and precast yards. The oil forms a physical barrier between the form and the concrete with the surfactant working in conjunction with the alkalinity of the concrete to produce a high standard of finish.

​Price       Mould Release Oil​         20 litre drum​       £   57.95 per drum​
​Price       Mould Release Oil​       205 litre drum​       £ 345.00 per drum​

Shutterfill /TieFill  Repair Compound  Fast Setting Hole Filler

A two-part polyester resin, quick setting repair compound for filling holes and damaged areas of timber formwork. Trowel applied. Shutterfill is a polymer modified, fibre reinforced, cementitious powder designed specifically for plugging tie holes. When mixed with water it forms a cohesive easy-to-apply shrinkage compensating compound and cures to develop a strongly bonded watertight plug to form an effective seal. This product is part of the Tie Bar System we hold in stock. 

​Price       Shutterfill/ Tie Hole repair Compound​       8kg pack​       £ 42.50 / pack

Adjustable Kickers / Plastic Kickers

Adjustable Kickers are used to space wall shutters thus eliminating the need for a traditional kicker. They can be located in the centre of the wall with a cap on each end (double sided) or offset with one cap only (single sided) where a waterbar is present, or in a wide wall.

Adjustable Kickers Price :   width - 100mm/150mm/200mm/250mm/300mm    £ Call for Price

Plastic Kickers are used to locate the formwork panel at the base of walls. They are positioned using a masonry nail (nail not included).

Plastic Kickers   Price :        48mm diameter x 30mm high  £ Call for Price  0800 047 6775

Speed Edge Formwork / Shuttering Strip Rolls

Speed Edge FormworkSpeed Edge formwork is made from galvanised sheet metal and is used for shuttering base and floor slabs.  These strips are 2.25 mts long and available from 140mm to 500mm .               

Shuttering Strip RollsThese rolls are available in heights from 140mm to 550mm, with perforations every 50mm. Almost any design can be produced on site with this system. Other heights available on request.  

Shuttering Strip SheetsTrapezoidal profile shuttering system can be used for interior and exterior shuttering.They are supplied in flat sheets and the folded into shape on site.

Please call   0800 0476775   for Price

Corrugated Beamform Shuttering Disposable / Lightweight Formwork

BeamForm gives the contractor a quick and cost effective method of shaping formwork for ground beams / pile caps, and does away for need of ply or steel shuttering. Manufactured from 8mm heavy duty poly-propylene. It comes in a standard sheets size of 4.8m x 2.0m x 8mm, however if required it can be specified to come pre-scoured to suite the required beam sizes.It is formed into U sections to suit site rquirements and arrives flat packed.

​Price       Beamform Shuttering Sheets​           4mt x 2mt sheets​       £ 49.50 / sheet​
​Price       Beamform Shuttering Sheets​       4.4mt x 2.4mt sheets​       £ 65.00 / sheet

Column Formers 

Call for price     0800 047 6775

Bag Column formers are a single use of formwork system that gives an excellent smooth fair face surface finish. Our column formers are manufactured by welding together several layers of high quality polyethylene. Once this is complete, a water resistant foil is also spirally wound over the kraft paper, sealing the column against humidity. This manufacturing process requires no additional adhesives which reduces the wall thickness, making the BAG Column formers light and easy to handle.

Designs:

Lined - BAG Column Formers have a PVC liner which is fitted the whole length of the inner diameter the Column former, this provides an impeccably smooth finish. BAG column formers will only leave a hairline seam on the concrete form the point where the liner joint meets. Unlined – BAG Column formers are also available unlined for applications where surface finish is not critical. This column former will leave a spiral effect on the finished column. Square - BAG can offer square or rectangular columns on request,made from our standard Column former with an additional polystyrene insert, manufactured to your specific requirements. Bespoke - BAG can also offer made to order bespoke designs


Claymaster/Claylite/Clayfill/Clayshield   1200mm x 2400mm sheets 

Claymaster is a low density compressible expanded polystyrene used to relieve the effects of groundheave. It is coloured pink for easy identification on site. Its main applications are to vertical faces of groundbeams in piled and trenchfill foundations.To be fixed onto the vertical face of the groundbeams using Claymaster Fixing Pins.

​Price       50mm Claymaster/Claylite Boards​           1200mm x 2400mm​             £ 35.00 per sheet​
​Price       75mm Claymaster/Claylite Boards​           1200mm x 2400mm​             £ 48.00 per sheet​
​Price       100mm Claymaster/Claylite Boards​           1200mm x 2400mm​             £ 69.00 per sheet​
​Price       150mm Claymaster/Claylite Boards​           1200mm x 2400mm​             £ 84.00 per sheet​

Expamet Hy-Rib Metal Formwork /Rib Stop  

Hyrib is a galvanized permanent shuttering system with a unique design incorporating mesh and roll formed ribs. This system retains poured concrete and achieves a significant reduction in the pressure of concrete normally associated with conventional formwork. It can be placed before reinforcing rods which are installed after by piercing them through the mesh area in the Hy-rib.

This light and versatile product can be cut and bent to shape, therefore suiting may applications and can be fitted in less time than traditional formwork. The advantages of Hyrib are that no stripping or preparation work to the joint is necessary before bonding to any adjacent pour. Also if reinforcement is in place it will allow continuation of fixing without a break. Hyrib applications include construction joints, stop ends and retaining walls where the surface finish to the concrete is not important but is also suitable for installation in water retaining structures and is recommended for use with water bars.

​Price       Hyrib/Formrib Sheets​           445mm x 2000mm​            £ 32.65 per sheet​
​Price       Hyrib/Formrib Sheets​           445mm x 3000mm​           £ 39.65 per sheet​

       

                  Tie Bar Rod System

               plastic sleeve

          Thruty Sleeve / Tubing

ORDER LINE 0800 047 6775

                thruty cones

                     Thruty Cones


           wing nut

                         Wing Nut

                waler plates 2

                      Waler Plates


        HEX NUT

                           Hex Nuts


          weldable anchor

                  weldable Anchors

ORDER LINE 0800 047 6775

                chamfer angle

               Chamfer Angle Fillet


              shuttertape

          Groutcheck Tape & Foam


              aquaplug

                 Aquaplugs/Stoppers


              adjustable Kickers

                    Adjustable Kickers

ORDER LINE 0800 047 6775

                  beamform 1

              Beamform with Spacers


            beamform 3

               Beamform Shuttering

             speed edge formwork

              Speed Edge Formwork

                 column former

                  Column Formers


ORDER LINE 0800 047 6775

     

      Claymaster for Groundheave


        

        Claylite for Groundheave

        shuttering strips - rolls

             Shuttering Strips - Rolls

      

                      Hyrib

ORDER LINE 0800 047 6775

expamet 2 

       Expamet Hyrib Formwork

General

ORDER LINE 0800 047 6775

Telephone

0800 047 6775​

shaun@specialistconstructionsupplies.co.uk

Address

Carlton Dairy
Carlton Farm
Frank Lane
Nun Monkton
York
YO26 8EJ