Fosroc Thioflex 600 Gun Grade Thioflex 600 Data Sheet
Thioflex 600 Gun Grade is a two-component joint sealant, based on a liquid polysulphide polymer which, when mixed and applied, cures to form a tough, rubber-like seal. The cured sealant exhibits excellent adhesion to most primed surfaces including concrete, glass, aluminium and stainless steel. Thioflex 600 Gun Grade is particularly recommended for use in civil structures, high rise buildings and other applications where access for subsequent maintenance will be difficult and the risk of early movement failure must be minimised. It is also suitable for sealing joints in brickwork, retaining walls, reservoirs, basements and subway
|Price|| Thioflex 600 Gun Grade|| 2.5 litre tin|| £ 44.65 each|
|Price|| Primer No 7|| 500 ml tin|| £ 28.65 each|
Fosroc Thioflex 600 Pouring Grade Thioflex 600 Data Sheet
It is also suitable for sealing joints in brickwork, retaining walls, basements and subways. Thioflex 600 pouring grade is recommended for initial sealing of expansion joints and stress relief joints in floors and sealing other horizontal surfaces.Thioflex 600 pouring grade for joints in horizontal surfaces is supplied in 5 litre packs with the base and curing agent in separate tins. Thioflex 600 is particularly recommended for use in highrise buildings and other applications where access for subsequent maintenance will be difficult and the risk of early movement failure must be minimised.
|Price|| Thioflex 600 Pouring Grade|| 5 litre tin|| £ 94.65 each|
|Price|| Primer No 7|| 500 ml tin|| £ 28.65 each|
Grace Vertiseal CE Vertiseal Data Sheet
Vertiseal is a gun grade, high performance polysulphide sealant for general civil and structural applications and is suitable for all types of joints in potable water retaining structures. Vertiseal is easy to apply and the reactor-in-base aids uniform dispersal during mixing. It can be used in wide joints up to 40mm.
|Price|| Grace Vertiseal CE Sealant|| 2.5 kg pack|| £ 94.65 each|
Grace Paraseal Paraseal Data Sheet
Paraseal Two-part, cold applied, pouring grade polysulphide sealant for sealing horizontal movement joints in buildings, and civil engineering structures. Applications : Horizontal movement and onstruction/contraction joints in: • Reinforced concrete structures • Bridges • Subways • Tunnels • Culverts • Tanks • Silos and other reinforced concrete buildings
|Price|| Paraseal Sealant|| 5 litre pack|| £ Call for Price 0800 047 6775|
Arbokol 1000 Sealant Arbokol 1000 data Sheet
Colours : Black , Grey , Teak , White . Arbokol 1000 is a one part Polysulphide sealant which cures on exposure to moisture vapour to form a firm but flexible rubber. Arbokol 1000 : High Durability One Part Polysulphide Sealant Recommended for Structural Joints In Heavy Cladding , Perimeter Sealing of Timber Windows , Not recommended , Joints Wider Than 25mm , Public Areas/Schools or areas liable to vandalism due to relatively slow initial cure , Internal Use, Overpainting without prior compatability testing of the paint .
|Price|| Arbokol 1000 Sealant|| 380ml cartridge|| £8.95 each|
OIL & FUEL RESISTANT SEALANTS
Fosroc Colpor 200PF Sealant Colpor 200PF Data Sheet
Colpor 200PF is for the sealing and maintenance of joints in concrete roads, concrete runways and hard standings. Colpor 200PF is particularly suitable for sealing areas where fuel and oil spillage might occur such as aircraft fuelling areas, oil terminals, garage forecourts, parking and cargo areas. Advantages : High durability and long service life , High movement accommodation , Cold applied — no heating equipment required , Fuel, oil and hydraulic fluid resistance , Jet blast resistant .
|Price|| Colpor 200PF Sealant|| 5 litre pack|| £ 94.00 each|
Fosroc Nitoseal PU 800 Nitoseal PU 800 Data Sheet
Fosroc Nitoseal PU800 is a two-component gun grade elastomeric sealant which provides a tough expy PU seal for limited movement joints. After mixing, the resultant compound will cure to provide an exceptionally robust seal, while retaining a degree of flexibility. Fosroc Nitoseal PU800 is abrasion resistant and withstands spillage of fuel oils, mineral acids and vegetable oils. Nitoseal PU800 can be used in joints between 5mm and 50mm wide.
|Price|| Nitoseal PU 800 Sealant|| 2 x 2 litre pack|| £ 206.45 per pack|
Fosroc Nitoseal PU878 Nitoseal 878 Data Sheet
For the sealing and maintenance of joints in concrete roads, concrete runways and hard standings. Nitoseal PU878 is particularly suitable for sealing areas where fuel and oil spillage might occur such as aircraft fuelling areas, oil terminals, garage forecourts, parking and cargo areas. Advantages : Fuel, oil and hydraulic fluid resistance , High durability and long service life , High movement accommodation.
|Price|| Nitoseal PU 878 Sealant|| 2 x 5 litre pack|| Call for Price |
Grace Servigard DW Servigard DW Data Sheet
Damp surface tolerant - uniquely bonds to damp concrete - Chemically resistant - unaffected by aggressive ground water conditions, oil, fuel and dilute acids. - Resistant to damage - provides tough impact resistant sealant to protect joint arisses in factory floors or slabs subject to wear - Chemically curing - cold applied, easily mixed, can be gun applied or trowelled.Servigard DW is a Cementitious, flexible, moisture tolerant sealant for construction joints in reinforced and precast concrete. Advantages - UK WBS Listed - Approved for contact in potable water - Biologically resistant - withstands microbiological degradation in aerobic and anaerobic conditions in sewerage installations .
|Price|| Servigard DW Sealant|| 5.5 kg pack|| Call for Price |
Sikaflex Tank N Sikaflex Tank N Data Sheet
Sikaflex® Tank N is a one part, moisture curing, elastic joint sealant which is used in areas for the storage, filling and handling of water polluting liquids. Benefits : High chemical resistance , High mechanical resistance , Movement capability of 25% (ISO 9047) , Excellent application properties RECOMMENDED FOR : Floor joints in petrol stations, joints in handling areas, storage tanks and containment bunds, movement- and connection joints according to IVD data sheet no. 1. I. E. in workshops and parking garages .
|Price|| Sikaflex Tank N|| 600cc foil pack|| £ 12.95 each|
SEALANTS FOR SEWAGE TREATMENT & WASTE WATER
Fosroc Nitoseal PU12 Nitoseal PU12 Data Sheet
Advantages : Resistant to aerobic and anaerobic bacteriological attack , Excellent adhesion under immersed conditions , Abrasion resistant , Separate component for accelerating the initial cure . Formerly Nitoseal 12Nitoseal PU12 is a two-part sealant designed to meet many of the requirements of the water industry in water retaining structures, sewage treatment and sea defence works. It is resistant to the bacteriological conditions associated with sewage treatment and silt accumulations in water storage. The abrasion resistance of Nitoseal PU12 makes it also appropriate for use for sealing movement joints in concrete sea walls subject to tidal scour
|Price|| Nitoseal PU12|| 4 x 2 litre units per pack|| £ 389.95 per pack|
Grace Servijoint 1 DW Servijoint 1 DW Data Sheet
Applications • Membrane terminations. • Joints in building facades. • Potable water structures. • Sewage treatment works. • Concrete factory floors. • Culverts. • Sea defence works. • Spillways.Servijoint 1 DW is a One-part high modulus polyurethane sealant/adhesive suitable for membrane terminations, joints in building facades and potable water retaining structures. Advantages • UK WBS listed - approved for use in potable water, does not support bacterial growth. • Damage resistant. • Easy application - no mixing, smooth tooling, low gunning force. • Excellent adhesion - to most building substrates using appropriate primer. • Fast curing. • Resistant to biodegradation. • Ozone resistant.
|Price|| Servijoint 1 DW|| 12 x 310ml per box|| Call for Price|
Sikaflex PRO 3 Sealant Sikaflex PRO 3 Data Sheet
Sikaflex® PRO-3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance. For indoor and outdoor applications. RECOMMENDED FOR : Movement and connection joints in floors , Indoor and outdoor applications for pedestrian and traffic areas (e. g. parking decks, car parks) , In warehouses and production areas , On surfaces such as in the food industry , In ceramic tiles such as in public buildings etc , Joints in waste water and sewage treatment plants , Floor joints in tunnel construction , Application in clean rooms .
|Price|| Sikaflex PRO-3|| 600cc foil pack|| £ 12.25 each|
Sikadur Combiflex SG Data Sheet
Uses : Sealing system for expansion, construction and connection joints, as well as for cracks in: Tunnels and culverts Hydro electric power plants , Sewage treatment plants , Roof joints, Basements , Water retaining structures and drinking water reservoirs , Joints between rigid and flexible surfaces , Around iron, steel and concrete pipes Swimming pools .High performance joint sealing system for construction, expansion and connection joints as well as for cracks. When fixed to the joint, allows irregular and high movement in more than one direction, whilst maintaining a high quality seal. The Sikadur®-Combiflex® System consists of a flexible Hypalon waterproofing tape and a suitable Sikadur® epoxy adhesive.
Sealing of: Joints with extreme movement , Building sections where varying settlement is expected Cracks , Repair / overbanding of leaking or failed joint sealants .
|Price|| Sikadur Combiflex SG|| 1mm x 20cm x 25mt pack|| £ 837.52|
|Price|| Sikadur Combiflex SG|| 1mm x 10cm x 25mt pack|| £ 448.00|
|Price|| Sikadur Combiflex SG|| 2mm x 20cm x 25mt pack|| £ 1,295.00|
FOSROC GENERAL BUILDING SEALANTS
Fosroc Nitoseal MS60 Data Sheet
Nitoseal MS60 is suitable for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints. Advantages , Adhesion to most common building materials , Single component with fast rate of cure , Easy to apply , Can be applied to damp substrates , Primerless for most applications (see “Priming”) , UV resistant and colour stable , Performs as an acoustic sealant , Available in a range of colours , Environmentally friendly
|Price|| Nitoseal MS60|| 380 ml|| £6.95 each ( 20 per box )|
Fosroc Nitoseal MS100 Nitoseal MS100 Data Sheet
Nitoseal MS100 has been formulated for stain-free sealing of joints in and around concrete, brick, masonry, pre-cast panels, stone cladding, windows, doors and fibre cement sheeting. Advantages, Will not stain masonry, marble or other surfaces.Excellent primer-less* adhesion to most common building materials. Can be applied to damp substrates, Fast neutral cure. Highly flexible with excellent application characteristics. Low odour, environmentally friendly. Low modulus and high movement capabilities. Excellent UV and weather resistance Nitoseal MS100 may be used as a sealant to assist with sound insulation. Good adhesion to silicone, polysulphide or polyurethane contaminant.
|Price|| Nitoseal MS100|| 380 ml|| £ 24.95 each ( 20 per box )|
Fosroc Nitoseal MS300 Nitoseal MS300 Data Sheets
Nitoseal MS300 is suitable for sealing saw-cut and movement joints in internal floors, and external joints where abrasion resistance is required. It can also be used for external facade joints where a tougher seal is required. Advantages Suitable for forklift truck traffic , Suitable for saw cut and perimeter joints , Abrasion resistant , Withstands vehicular traffic , Single component , Fast rate of cure , Easy to apply at low temperature , Can be applied to damp substrates , Primer-less for most applications (see "Priming" section) , Hard, but flexible sealant; resists picking and vandalism .
|Price|| Niotseal MS300|| 600ml foil pack|| £ 18.75 each ( 10 per box )|
Fosroc Nitoseal MS600 Data Sheet
Fosroc Nitoseal MS600 civil engineering and water industry sealant is a one part medium modulus sealant based on hybrid silyl modified polyether technology. It has a fast rate of cure and forms a tough, highly durable and water resistant elastomer. Advantages : Approved for use in contact with potable water , Meets key international standards, Resistant to aerobic and anaerobic bacteriological attack , Exhibits excellent water resistance , Excellent resistance to dilute acids and alkalis , Cures to a tough, elastic rubber seal , Accommodates continuous and pronounced cyclic movement , High resistance to ageing, reduces physical damage due to climatic extremes , Single component yet fast rate of cure .
|Price|| Nitoseal MS600|| 600ml foil pack|| £ 16.75 each ( 10 per box )|
Fosroc Hilastic LM Hilastic LM Data Sheet
Hilastic LM is a one part low modulus neutral cure silicone sealant for sealing joints in building structures, uPVC windows and door frames .
|Price|| Hilastic LM|| 380 ml|| £ 12.25 each ( 25 per box )|
SIKA ONE PART SEALANTS
Sikaflex PRO 3 Sealant Data Sheet
Sikaflex® PRO-3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance. For indoor and outdoor applications. RECOMMENDED FOR :Movement and connection joints in floors , Indoor and outdoor applications for pedestrian and traffic areas (e. g. parking decks, car parks) , In warehouses and production areas , On surfaces such as in the food industry , In ceramic tiles such as in public buildings etc , Joints in waste water and sewage treatment plants , Floor joints in tunnel construction , Application in clean rooms .
|Price|| Sikaflex PRO-3 Sealant|| 600ml foil pack|| £ 12.25 each|
Sikaflex 11FC + Sikaflex 11FC + Data Sheet
Sikaflex®-11 FC+ is a one part, moisture curing, elastic joint sealants and multi purpose polyurethane adhesive. Suitable for indoor and outdoor applications. BENEFITS : 1 part, ready to use , Flexible and elastic , Solvent free and odourless , Very low emission EMICODE EC 1 PLUS . As a sealant: Bubble-free curing , Very good adhesion to most construction materials , Good mechanical resistance , Good weather and ageing resistance , Non sag consistency . As an adhesive: No need to grout the bonded part , Non-corrosive , Impact and vibration absorbing .
|Price|| Sikaflex 11FC +|| 300ml cartridge|| £ 13.59 each|
|Price|| Sikaflex 11FC +|| 600ml foil pack|| £ 16.95 each|
Sikaflex- Construction + Data Sheet Sikaflex-Construction + is a one component, permanently elastic joint sealant compound based on polyurethane. Sikaflex-Construction + is suitable for general construction facade joint sealing. General construction joint sealing , Brick/masonry joints , Door/window sealing , Pre-cast concrete cladding panel joint sealing , Joints in RC walls , Air and water sealing of metal and composite roof and wall cladding panels.
|Price|| Sikaflex Construction +|| 600ml foil pack|| £ 8.95 each|
Sikaflex PRO 3 SL Sikaflex PRO 3 SL Data Sheet
Sikaflex® PRO-3 SL is a moisture curing, self-levelling, 1-part elastic sealant based on polyurethane with high mechanical resistance. For indoor and outdoor applications. Suitable for use in hot and tropical climatic conditions. BENEFITS : 1-component , Self-levelling , Bubble free curing , Movement capability 25 % , Easy to apply Excellent adhesion to most substrates, Good mechanical and chemical resistance .
|Price|| Sikaflex PRO 3 SL|| 600ml foil pack|| £ 14.95 each|
Sikaflex AT Facade Data Sheet
Sikaflex® AT Facade is a 1-part, moisture curing elastic sealant suitable for joint sealing of movement and connection joints between same or different porous and non-porous substrates such as concrete, brick, steel and other metals etc. Advantages : Very good workability (low extrusion force, excellent smoothability) ■ Silicone free and over-paintable ■ Odourless and solvent-free (according to EU regulations) ■ Good weathering and ageing resistance ■ Movement capability 25% (ISO 9047) ■ Low stress to the substrate ■ Primer-less adhesion on many porous and non-porous substrates .
|Price|| Sikaflex AT Facade|| 600ml foil pack|| £ 14.53 each|
Sikaflex Tank N Sikaflex Tank N Data Sheet
Sikaflex® Tank N is a one part, moisture curing, elastic joint sealant which is used in areas for the storage, filling and handling of water polluting liquids. Benefits : High chemical resistance , High mechanical resistance , Movement capability of 25% (ISO 9047) , Excellent application properties . RECOMMENDED FOR :Floor joints in petrol stations, joints in handling areas, storage tanks and containment bunds, movement- and connection joints according to IVD data sheet no. 1. I. E. in workshops and parking garages .
|Price|| Sikaflex Tank N|| 600ml foil pack|| £ 12.95 each|
SWELLABLE HYDROPHILLIC SEALANTS
Sikaswell S-2 Data Sheet
Sealing: Construction joints , Pipe and steel work penetrations through walls and floor slabs Around all types of penetrations and construction joints , Construction joints in cable ducts, etc. Fixation: SikaSwell® - Profiles . Characteristics / Advantages : Easy to apply , Good adhesion to various substrates , Optimised expansion rate, therefore no damage to fresh concrete during curing ,Highly economical, Swells in contact with water , Permanently water resistant , Adaptable to fit many different detail tasks.Sikaswell S2 is a one part polyurethane sealant which swells in contact with water. To seal waterproof-structures and fix SikaSwell® - Profiles or Sika® Injectoflex.
|Price|| Sikaswell S-2 Sealant|| 600ml foil pack|| £ 32.00 each|
Fosroc Supercast SWX Supercast SWX Data Sheet
Supercast SWX can be used as an adhesive for bonding Supercast SW strips or as a problem-solving hydrophilic in difficult access areas including: Sealing around joints in precast manhole covers, cable ducts and pipes, etc. Sealing around precast segments , Sealing between rough surfaces, e.g. slurry walls and concrete slabs , Sealing around H-beams and other penetrations through concrete structures , Sealing around conventional rubber and plastic waterstops to provide ‘belt and braces’ seal prior to concrete pour .
|Price|| Supercast SWX Sealant|| 600ml foil pack|| £54.90 each|
De Neef Swellseal Mastic Swellseal Mastic Data Sheet
Product Advantages •Solvent free. •Swellseal® Mastic can be applied to concrete, PVC, HDPE, steel, etc. •The excellent filling and adhesion properties of the product provide a first line filling of cracks and voids, even on lightly humid, smooth or rough surfaces. •In contact with water Swellseal Mastic will expand to about 350% of it’s original volume. •Flexible system, which adapts to the irregular surface of the substrate. •Easy application with standard caulking gun. •Durable: will exceed the construction’s life. •Has a good all-round chemical resistance(*) and can resist petroleum, mineral and vegetable oils and greases. •Swellseal Mastic is approved for contact with potable water.Swellseal® Mastic is a one-component, polyurethane based, solvent free, hydro-swelling mastic, supplied in cartridges and aluminium sausages, for the sealing of construction joints and around pipe penetrations. Swelllseal Mastic cures and swells in the presence of moisture. Curing time depends on temperature and humidity conditions. Performance is not affected by the curing time.
|Price|| Swellseal Mastic|| 600ml foil pack|| £ 30.95 each|
Hydrotite Leakmaster Sealant Hydrotite Leakmaster Data Sheet
Used as an adhesive, filler and watertight sealant in construction joints, repairs and penetrations where a waterstop strip cannot be installed. Leakmaster is a gun-applied, single component sealant that exhibits excellent swelling and sealing properties in its cured state. It retains a rubber-like elasticity to maintain an effective watertight seal throughout its life. On application, it adheres readily to a wide range of materials including concrete, steel, glass, mortar and brickwork.
|Price|| Hydrotite Leakmaster Sealant|| Call for Price|||
FIRE RATED & ACOUSTIC SEALANTS
Fosroc Flamex S Data Sheet
One part low-modulus neutral cure fire rated silicone sealant. For fire protection of curtain walling, building façades, expansion joints and penetration seals, where pipes and cables pass through fire rated structures.
|Price|| Flamex S Sealant|| 20 x 380ml cartridges per box|| £ 348.95 per box|
|Price|| Flamex Primer|| 500ml tin|| £ 112.95 each|
Fosroc Flamex Fire Protection Data Sheet
Flamex Two is a high performance polysulphide intumescent sealant . Flamex Two is suitable for use in expansion joints and may be used in both internal and external joints . Flamex Two can be used in joints from 5 mm up to 50mm wide .Flamex One emulsion based intumescant sealant sets quickly and gives excellent adhesion to most building materials . Flamex One is suitable for sealing around fire door frames and fire protection boards , and can be used in joints from 5mm to 20mm . The minimum depth of seal should be 15mm , also acts as an acoustic sealant.
|Price|| Flamex One Sealant|| 20 x 380ml cartridges per box|| £ 279.98 per box|
|Price|| Flamex Two Sealant|| 4 x 2.5 litre per pack|| £ 465.00 per pack|
Sika Firestop Data Sheet
Sika FireStop is an easy to use, one part gun applied fire proof intumescent sealant based on polymerised inorganic silicate, suitable for all types of non moving joints and seals in fire compartments. Sika FireStop is suitable for all types of non moving joints and seals in fire compartments such as fire doors, chimneys, safes, stove pipes, pipe inlets, ventilation tubes etc.
|Price|| Sika Firestop Sealant|| 12 x 300ml cartridges per box|| £ 163.49 per box|
Everbuild AC50 Acoustic Sealant & Adhesive
AC50 Acoustic Sealant & Adhesive is a high strength, permanently flexible sealant and adhesive specifically formulated for sealing and bonding plasterboard and other kraft lined insulation boards. Typically used for walls, ceilings and dry lining applications. Independently tested to BS EN ISO 140/3. AC50 Acoustic Sealant Data Sheet
|Price|| AC50 Acoustic Sealant|| 900ml cartridge|| £ 14.95 each|
Everbuild Firemate Sealant Firemate Sealant Data Sheet
Fire Mate Sealant is an intumescent acrylic sealant that swells when exposed to temperatures in excess of 125°C to prevent the passage of fire and smoke and has a fire rating of up to 5 hours in certain joint configurations. Fire rated to BS 476 Part 20/EN1366-4 (2006). Acoustic rates to BS EN ISO 140/3. Tested for air permeability to EN13141-1.
|Price|| Firemate Sealant|| 310ml cartridge|| £ 7.95 each|
Everbuild AC95 Intumescant Acoustic Sealant
AC95 Acoustic Sealant & Adhesive is an intumescent acrylic sealant and adhesive specifically formulated for fire rated sealing and bonding applications on plasterboard and other kraft lined insulation boards. Provides up to 5 hours fire resistance, tested to BS 476, part 20/EN1366-4 (2006). Acoustic rated to BS EN ISO 140/3. Tested for air permeability to EN13141-1 Ventilation for buildings. Performance testing for components/products for residential ventilation. AC95 Intumescant Data Sheet
|Price|| AC95 Intumescant Acoustic Sealant|| 900ml|| £ 16.95 each|
Expansion Joint Backer Rod Joint Filler
Non absorbent compressible grey closed cell polyethylene foam backup material. It is inserted into a joint to control sealant depth and create a backstop to allow proper sealant tooling. Used behind sealants and mastics in expansion joints.
|Price|| 6mm x 2500 mt box|| £ 146.00|| Price|| 10mm x 1150 mt box|| £139.00|
|Price|| 13mm x 750 mt box|| £ 122.00|| Price|| 15mm x 550 mt box|| £ 112.00|
|Price|| 20mm x 350 mt box|| £ 104.00|| Price|| 25mm x 200 mt box|| £ 103.50|
|Price|| 30mm x 160 mt box|| £ 112.00|| Price|| 40mm x 100 mt box|| £ 179.50|
|Price|| 50mm x 100 mt box|| £ 229.00|||||||
ADHESIVES & BONDING AGENTS
Sikadur 32 Epoxy Adhesive Data Sheet
SikaDur 32 is a two component, solvent free, cold cured epoxy bonding agent. Bonds all types of construction materials such as timber, brick, steel, iron, glass and stoneware. Damp-proof membrane. Bonding bridge. Bearing pads to concrete. Crack injection 5 - 10mm.
|Price|| Sikadur32 Epoxy Adhesive|| 5kg pack|| £ 124.50 per pack|
Fosroc Nitobond EP Epoxy Adhesive ( standard )
Epoxy resin concrete bonding agent. For bonding new cementitious materials to existing cementitious surfaces. For use on horizontal surfaces and on vertical surfaces where mortar or concrete can be supported by formwork. Ideal for extensions and repairs to concrete in factories, loading bays, trucking aisles, bridges, roads, bonded or granolithic floor toppings, etc. Nitobond EP Data Sheet
|Price|| Nitobond EP|| 2.5kg pack|| £ 116.50 per pack|
Sikabond AT Universal Data Sheet
.SikaBond AT-Universal is an advanced multipurpose solvent free adhesive for the bonding of solid or engineered wood flooring, for use as a liquid batten system. It is a high strength elastic bond adhesive and has strong adhesion on most common building substrates including hard PVC, GFRP, wood, ceramics, tiles, bricks, concrete, cement screed, aluminium, stainless steel etc. This adhesive is installed in strips and covers 2m2 per tube when the strips are 200mm apart, and 1.25m2 when used with Sikabond Silent Lay Mat. This is suitable for use with underfloor heating.
|Price|| Sikabond AT Universal|| 300ml|| £13.95 each|
Sikabond AT Metal Data Sheet
SikaBond® AT Metal is a one part, solvent-free, elastic adhesive for porous and non-porous substrates, particularly for metals. BENEFITS : 1-part, ready to use , Very good adhesion without priming on many metals and non-porous substrates i.e. copper , Good adhesion on porous substrates (i.e. concrete, roof tiles, mortar etc.) , Excellent workability , Short cut off string , Good initial tack and fast curing , Non-corrosive , Good weathering and water resistance , Silicone free , Solvent free .
|Price|| Sikabond AT Metal|| 300ml|| £ 15.60 each|
Sikaflex 11 FC + Sikaflex 11FC + Data Sheet
Sikaflex®-11 FC+ is a one part, moisture curing, elastic joint sealants and multi purpose polyurethane adhesive. Suitable for indoor and outdoor applications. BENEFITS :1 part, ready to use , Flexible and elastic , Solvent free and odourless , Very low emission EMICODE EC 1 PLUS . As a sealant: Bubble-free curing , Very good adhesion to most construction materials , Good mechanical resistance , Good weather and ageing resistance , Non sag consistency . As an adhesive: No need to grout the bonded part , Non-corrosive , Impact and vibration absorbing .
|Price|| Sikaflex 11FC +|| 300ml cartridge|| £ 13.59 each|
|Price|| Sikaflex 11FC +|| 600ml foil pack|| £ 16.95 each|