JOINT SEALANTS & ADHESIVES

Fosroc Thioflex 600 Gun Grade

Thioflex 600 Gun Grade is a two-component joint sealant, based on a liquid polysulphide polymer which, when mixed and applied, cures to form a tough, rubber-like seal. The cured sealant exhibits excellent adhesion to most primed surfaces including concrete, glass, aluminium and stainless steel. Thioflex 600 Gun Grade is particularly recommended for use in civil structures, high rise buildings and other applications where access for subsequent maintenance will be difficult and the risk of early movement failure must be minimised. It is also suitable for sealing joints in brickwork, retaining walls, reservoirs, basements and subways. Thioflex 600 Data Sheet

Fosroc Thioflex 600 Pouring Grade

Thioflex 600 pouring grade is recommended for initial sealing of expansion joints and stress relief joints in floors and sealing other horizontal surfaces.Thioflex 600 pouring grade for joints in horizontal surfaces is supplied in 5 litre packs with the base and curing agent in separate tins.  Thioflex 600 is particularly recommended for use in highrise buildings and other applications where access for subsequent maintenance will be difficult and the risk of early movement failure must be minimised. Thioflex 600 Data Sheet

Arbokol AG2 Polysulphide Sealant

Arbokol AG2 Two-part Polysulphide Sealant, which when the components are mixed together, cures to form a flexible rubber seal. It has good adhesion to concrete, stone, metals and many other common building substrates. Recommended for structural floor Joints , carriageways , kerb & parapet wall joints , sea walls & water retaining structures (not drinking water).

Arbokol AG2 Data Sheet

Arbokol 1000 Sealant     

Colours : Black , Grey , Teak , White  . Arbokol 1000 is a one part Polysulphide sealant which cures on exposure to moisture vapour to form a firm but flexible rubber.  Arbokol 1000  : High Durability One Part Polysulphide Sealant  Recommended for Structural Joints In Heavy Cladding , Perimeter Sealing of Timber Windows , Arbokol 1000 Data Sheet

Fosroc Colpor 200PF Sealant   

Colpor 200PF is for the sealing and maintenance of joints in concrete roads, concrete runways and hard standings. Colpor 200PF is particularly suitable for sealing areas where fuel and oil spillage might occur such as aircraft fuelling areas, oil terminals, garage forecourts, parking and cargo areas. Advantages :  High durability and long service life , High movement accommodation , Cold applied — no heating equipment required , Fuel, oil and hydraulic fluid resistance , Jet blast resistant. Colpor 200PF Data Sheet

Fosroc Nitoseal PU 800

Fosroc Nitoseal PU800 is a two-component gun grade elastomeric sealant which provides a tough expy PU seal for limited movement joints. After mixing, the resultant compound will cure to provide an exceptionally robust seal, while retaining a degree of flexibility. Fosroc Nitoseal PU800 is abrasion resistant and withstands spillage of fuel oils, mineral acids and vegetable oils. Nitoseal PU800 can be used in joints between 5mm and 50mm wide.

Nitoseal PU800 Data Sheet

Sikaflex Tank N

Sikaflex® Tank N is a one part, moisture curing, elastic joint sealant which is used in areas for the storage, filling and handling of water polluting liquids. Benefits  :  High chemical resistance , High mechanical resistance , Movement capability of 25% (ISO 9047) , Excellent application properties RECOMMENDED FOR : Floor joints in petrol stations, joints in handling areas, storage tanks and containment bunds, movement- and connection joints according to IVD data sheet no. 1. I. E. in workshops and parking garages .

Sikaflex Tank Data Sheet

Fosroc Nitoseal PU12

Advantages :  Resistant to aerobic and anaerobic bacteriological attack  ,  Excellent adhesion under immersed conditions  ,  Abrasion resistant  ,  Separate component for accelerating the initial cure .    Formerly Nitoseal 12Nitoseal PU12 is a two-part sealant designed to meet many of the requirements of the water industry in water retaining structures, sewage treatment and sea defence works. It is resistant to the bacteriological conditions associated with sewage treatment and silt accumulations in water storage. The abrasion resistance of Nitoseal PU12 makes it also appropriate for use for sealing movement joints in concrete sea walls subject to tidal scour. Nitoseal PU12 Data Sheet

Sikaflex PRO 3 Purform

Sikaflex® PRO-3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance. For indoor and outdoor applications. RECOMMENDED FOR : Movement and connection joints in floors ,  Indoor and outdoor applications for pedestrian and traffic areas (e. g. parking decks, car parks) , In warehouses and production areas ,  On surfaces such as in the food industry ,  In ceramic tiles such as in public buildings etc ,  Joints in waste water and sewage treatment plants ,  Floor joints in tunnel construction ,  Application in clean rooms.

Sikaflex PRO 3 Data Sheet

Sikadur Combiflex SG    

Uses :  Sealing system for expansion, construction and connection joints, as well as for cracks in: Tunnels and culverts Hydro electric power plants , Sewage treatment plants , Roof joints,  Basements , Water retaining structures and drinking water reservoirs , Joints between rigid and flexible surfaces , Around iron, steel and concrete pipes Swimming pools .High performance joint sealing system for construction, expansion and connection joints as well as for cracks. When fixed to the joint, allows irregular and high movement in more than one direction, whilst maintaining a high quality seal. The Sikadur®-Combiflex® System consists of a flexible Hypalon waterproofing tape and a suitable Sikadur® epoxy adhesive.

Sealing of:  Joints with extreme movement , Building sections where varying settlement is expected Cracks , Repair / overbanding of leaking or failed joint sealants . 

Sika Combiflex Data Sheet

Fosroc Nitoseal MS100

Nitoseal MS100 has been formulated for stain-free sealing of joints in and around concrete, brick, masonry, pre-cast panels, stone cladding, windows, doors and fibre cement sheeting.  Nitoseal MS100 Data Sheet

Fosroc Nitoseal MS300

Nitoseal MS300 is suitable for sealing saw-cut and movement joints in internal floors, and external joints where abrasion resistance is required. It can also be used for external facade joints where a tougher seal is required. Advantages  Suitable for forklift truck traffic , Suitable for saw cut and perimeter joints , Abrasion resistant , Withstands vehicular traffic , Single component , Fast rate of cure . Nitoseal MS300 Data Sheet

Fosroc Nitoseal MS600

Fosroc Nitoseal MS600 civil engineering and water industry sealant is a one part medium modulus sealant based on hybrid silyl modified polyether technology. It has a fast rate of cure and forms a tough, highly durable and water resistant elastomer.  Advantages : Approved for use in contact with potable water , Meets key international standards,  Resistant to aerobic and anaerobic bacteriological attack , Nitoseal MS600 Data Sheet

Arbomeric MP10

For Brickwork & Blockwork Joints

Arbothane MP10 is a one part low modulus modified polymer sealant which cures on exposure to moisture vapour to form an elastic rubber. This product is a non silicone and can be painted over. Recomended for use in structural joints in brickwork and blockwork. Arbomeric MP10 Data Sheet

.

Arbomeric MP20

For Movement Joints & Heavily trafficked areas

Arbothane MP20 is a one part high modulus modified polymer sealant .Recomended for use in structural joints in floors and floor joints in heavily trafficked areas

Arbomeric MP20 Data Sheet

Sikaflex PRO 3 Purform

Sikaflex® PRO-3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance. For indoor and outdoor applications. RECOMMENDED FOR : Movement and connection joints in floors , Indoor and outdoor applications for pedestrian and traffic areas (e. g. parking decks, car parks) , In warehouses and production areas , On surfaces such as in the food industry , In ceramic tiles such as in public buildings etc , Joints in waste water and sewage treatment plants , Floor joints in tunnel construction , Application in clean rooms.

Sikaflex PRO 3 Data Sheet

Sikaflex 11FC Purform

Sikaflex®-11 FC+ is a one part, moisture curing, elastic joint sealants and multi purpose polyurethane adhesive. Suitable for indoor and outdoor applications. BENEFITS : 1 part, ready to use , Flexible and elastic , Solvent free and odourless , Very low emission  EMICODE EC 1 PLUS . As a sealant: Bubble-free curing , Very good adhesion to most construction materials , Good mechanical resistance , Good weather and ageing resistance , Non sag consistency . As an adhesive: No need to grout the bonded part , Non-corrosive , Impact and vibration absorbing. Sikaflex 11FC Data Sheet

Sikaflex- Construction +

Sikaflex-Construction + is a one component, permanently elastic joint sealant compound based on polyurethane. Sikaflex-Construction + is suitable for general construction facade joint sealing. General construction joint sealing , Brick/masonry joints , Door/window sealing , Pre-cast concrete cladding panel joint sealing , Joints in RC walls , Air and water sealing of metal and composite roof and wall cladding panels. Sikaflex Construction + Data Sheet

Sikaflex PRO 3 SL

Sikaflex® PRO-3 SL is a moisture curing, self-levelling, 1-part elastic sealant based on polyurethane with high mechanical resistance. For indoor and outdoor applications. Suitable for use in hot and tropical climatic conditions.  BENEFITS : 1-component , Self-levelling , Bubble free curing , Movement capability 25 % , Easy to apply  Excellent adhesion to most substrates,  Good mechanical and chemical resistance. Sikaflex PRO 3 SL Data Sheet

SikaHyflex 250 Facade

Sikaflex® AT Facade is a 1-part, moisture curing elastic sealant suitable for joint sealing of movement and connection joints between same or different porous and non-porous substrates such as concrete, brick, steel and other metals etc.    SikaHyflex Data Sheet

Sikaflex Tank N

Sikaflex® Tank N is a one part, moisture curing, elastic joint sealant which is used in areas for the storage, filling and handling of water polluting liquids. Benefits : High chemical resistance , High mechanical resistance , Movement capability of 25% (ISO 9047) , Excellent application properties .  Sikaflex Tank Data Sheet

Sealant Barrel Guns

Fosroc Supercast SWX

Supercast SWX can be used as an adhesive for bonding Supercast SW strips or as a problem-solving hydrophilic in difficult access areas including:   Sealing around joints in precast manhole covers, cable ducts and pipes, etc. Sealing around precast segments , Sealing between rough surfaces, e.g. slurry walls and concrete slabs ,  SWX Data Sheet

De Neef  Swellseal Mastic

Product Advantages •Solvent free. •Swellseal® Mastic can be applied to concrete, PVC, HDPE, steel, etc. •The excellent filling and adhesion properties of the product provide a first line filling of cracks and voids, even on lightly humid, smooth or rough surfaces. •In contact with water Swellseal Mastic will expand to about 350% of it’s original volume. •Flexible system, which adapts to the irregular surface of the substrate. •Easy application with standard caulking gun. •Durable: will exceed the construction’s life. •Has a good all-round chemical resistance(*) and can resist petroleum, mineral and vegetable oils and greases. •Swellseal Mastic is approved for contact with potable water. Swellseal® Mastic is a one-component, polyurethane based, solvent free, hydro-swelling mastic, supplied in cartridges and aluminium sausages, for the sealing of construction joints and around pipe penetrations. Swelllseal Mastic cures and swells in the presence of moisture. Curing time depends on temperature and humidity conditions. Performance is not affected by the curing time.

Swellseal Mastic Data Sheet

Tokstrip & Longstrip - Joint Sealant for Manhole Chambers

Tokstrip & Longstrip joint sealant are used for sealing precast concrete manholes, inspection chambers, shafts, tunnels and box culverts.  Tokstrip & Longstrip  joint sealant are designed to provide a permanently flexible, watertight joint between precast concrete units - these joints are formed under compression when the Tokstrip & Longstrip  compound is reduced to half its original thickness. Tokstrip & Longstrip sealants are easy to apply by hand and ensure an effective long-term seal under all site and weather conditions. Tokstrip & Longstrip have remained the preferred choice for sealing precast concrete unit joints in the construction and water utility industry.

Tokstrip Data Sheet

Longstrip Data Sheet

Fosroc Flamex Fire Protection

Flamex Two is a high performance polysulphide intumescent sealant . Flamex Two is suitable for use in expansion joints and may be used in both internal and external joints . Flamex Two Data Sheet

Flamex One emulsion based intumescant sealant sets quickly and gives excellent adhesion to most building materials . Flamex One is suitable for sealing around fire door frames and fire protection boards , and can be used in joints from 5mm to 20mm . Flamex One Data Sheet

Expansion Joint Backer Rod

Joint Filler

Non absorbent compressible grey closed cell polyethylene foam backup material. It is inserted into a joint to control sealant depth and create a backstop to allow proper sealant tooling.   Used behind sealants and mastics in expansion joints.

Sikadur 32 + Epoxy Adhesive  

SikaDur 32 + is a two component, solvent free, cold cured epoxy bonding agent. Bonds all types of construction materials such as timber, brick, steel, iron, glass and stoneware. Damp-proof membrane. Bonding bridge. Bearing pads to concrete. Crack injection 5 - 10mm. Sikadur 32 Data Sheet

Fosroc Nitobond EP Epoxy Adhesive

Epoxy resin concrete bonding agent. For bonding new cementitious materials to existing cementitious surfaces. For use on horizontal surfaces and on vertical surfaces where mortar or concrete can be supported by formwork.  Nitobond EP Data Sheet

Sikabond AT Universal

.SikaBond AT-Universal is an advanced multipurpose solvent free adhesive for the bonding of solid or engineered wood flooring, for use as a liquid batten system. It is a high strength elastic bond adhesive and has strong adhesion on most common building substrates including hard PVC, GFRP, wood, ceramics, tiles, bricks, concrete, cement screed, aluminium, Sikabond AT Universal Data Sheet

Sikabond AT Metal

SikaBond® AT Metal is a one part, solvent-free, elastic adhesive for porous and non-porous substrates, particularly for metals.  BENEFITS  :  1-part, ready to use , Very good adhesion without priming on many metals and non-porous substrates i.e. copper , Good adhesion on porous substrates (i.e. concrete, roof tiles, mortar etc.) , Sikabond AT Metal Data Sheet

Sikaflex 11 FC Purform

Sikaflex®-11 FC+ is a one part, moisture curing, elastic joint sealants and multi purpose polyurethane adhesive. Suitable for indoor and outdoor applications. BENEFITS :1 part, ready to use , Flexible and elastic , Solvent free and odourless , Very low emission EMICODE EC 1 PLUS . As a sealant: Bubble-free curing , Very good adhesion to most construction materials , Good mechanical resistance , Good weather and ageing resistance , Non sag consistency . As an adhesive: No need to grout the bonded part , Non-corrosive , Impact and vibration absorbing.

Sikaflex 11FC Data Sheet