DAMP PROOF MEMBRANE

Visqueen BBA Polythene DPM

Visqueen Building Product’s BBA approved Damp Proof Membrane is a blown film of extruded low-density polyethylene suitable for use in concrete floors not subject to hydrostatic pressure, in accordance with the relevant clauses of CP 102: 1973.

The product can be installed either as an oversite membrane, between a blinded hard core bed and the base concrete, or as a sandwich membrane in base concrete or between the base concrete and screed.  Visqueen DPM Polythene Data Sheet .

Fire Retardent Polythene     Orange fire rated polythene

Orange Flame Retardant Polythene sheet membrane for screening off areas both vertically and horizontally during construction work to satisfy insurance regulations.Orange flame retardant LPCB has complied with the requirements identified in LPS 1207: Issue 1 - Fire Requirements for Protective Covering Materials. LPS 1207 encompasses the most stringent test methods applicable to temporary protection systems, including vertical flame, toxic gas, smoke emission and oxygen index tests.

Visqueen Double Sided Jointing Tape

High performance double sided butyl tape for bonding DPMs and Radon Membranes.

Visqueen Pro Single Sided Jointing Tape

Cross weave glass fibre reinforced tape coated with a high tack aggressive adhesive system for sealing laps in damp proof membranes. When used in conjunction with Visqueen Double Sided Jointing tape, the system performs a BBA (Cert 94/3009) approved watertight seal.

Polythene Jointing Tape 50mm,75mm & 100mm

Polythene Jointing Tape for lap joining of plastic sheeting such as DPCs and DPMs. The tape provides a bonded seal for polythene sheeting along with resistance to moisture and air.

Polythene Jointing Tape Double Sided 50mm

Polythene Jointing Tape for lap joining of plastic sheeting such as DPCs and DPMs. The tape provides a bonded seal for polythene sheeting along with resistance to moisture and air.

VISQUEEN VAPOUR BARRIERS & VCLs

Visqueen Vapour Check   For factories, warehouses & industrial units

Visqueen Vapour Check is used to omit the risk of interstitial condensation within a structure as well as improving the airtightness of the building. Visqueen Vapour Check restricts the passage of warm, moist air from within the building from permeating into the structure or the roof. Visqueen Vapour Check is manufactured using virgin polyethylene. Visqueen Vapour Check Data Sheet .

Tuffreel Vapour Check Barrier

The primary function of Tuffreel vapour barrier is to control the movement of interstitial condensation within a structure. Persistent exposure to high moisture levels within the structure can cause decay of timber, corrosion of metal parts ( e.g. nails, connectors etc ) , reduction in insulation values and adversely affect masonary. Condensation will occur when saturated warm air comes into contact with a cold surface or cooler air.  Tuffreel vapour barrier is specifically designed for use as a vapour barrier to be applied to the warm side of insulation and should be installed according to the recommendations of BS5250:2002 .

Capital VCL Moisture Vapour Barrier

Capital VCL is predominately used in timber frame constructions, but can also be used in a wide variety of other applications such as flooring and ceiling projects so they comply with BRE (Builders Research Establishment) regulations. The product is made with top grade virgin material thus meeting the NHBC standard 6.2. Like all Capital Valley Plastics products Capital VCL is made within the strict working tolerances under the ISO9001 accreditation and are therefore uniquely labelled and registered.

Typical roll size is 2.5M or 2.7M x 50M to suit standard floor to ceiling measurements, reducing wastage and increasing efficiency. It is available in clear or green tint so fixing points are easy to locate through the layer.

Visqueen Vapour Barrier  For Apartment Blocks, Offices & Schools

Visqueen Vapour Barrier is used to omit the risk of interstitial condensation within a structure as well as improving the general airtightness of the building. Visqueen Vapour Barrier restricts the passage of warm, moist air from within the building from permeating into the structure or the roof. It is commonly used within timber frame housing as well as commercial buildings. Visqueen Vapour Barrier is manufactured using virgin polyethylene. Visqueen Vapour Barrier Data Sheet .

Visqueen High Performance  Vapour Barrier

Visqueen High Performance (HP) Vapour Barrier is used to omit the risk of interstitial condensation within a structure as well as improving the general airtightness of the building. Visqueen HP Vapour Barrier restricts the passage of warm, moist air from within the building from permeating into the structure or the roof. It is commonly used within timber frame housing as well as commercial buildings. Visqueen HP Vapour Barrier is a high quality multi layer reinforced LDPE membrane with an aluminium core. Visqueen Vapour Barrier Data Sheet .

Visqueen FB Self adhesive Vapour Barrier

Visqueen Fully Bonded (FB) Vapour Barrier is used to omit the risk of interstitial condensation within a structure as well as improving the general airtightness of the building. Visqueen FB Vapour Barrier restricts the passage of warm, moist air from within the building from permeating into the structure or the roof. It is commonly used within timber frame housing as well as commercial buildings. Visqueen Fully Bonded Vapour Barrier Data Sheet .

Visqueen Vapour Tapes    For jointing on all vapour barriers

Visqueen Vapour tapes are manufactured using a valeron/foil laminate containing a highly aggressive acrylic adhesive system. Visqueen Vapour Tape is 75mm x 15m and used to seal laps in Visqueen Vapour Control Layer Membranes; Visqueen Vapour Edge Tape is 150mm x 15m and used to seal the membrane to perimeters on various surfaces such as wood and masonry. Visqueen Vapour Tapes Data Sheet .

FROST PROTECTION MATERIALS

Hessian Matting    For frost protection

Builders Hessian will protect lime work from the rain, direct sunlight and drying wind/breeze to allow carbonation to take place and hence prevent failure. In colder weather it offers great frost protection but there are also several other uses that we have found out about from customers.

Frost Protection Mats   Curing blanket used in Summer & Winter

Used to prevent freshly poured concrete slabs from being damaged by freezing temperatures - which could see harm caused to the structure as the material solidifies - this item is 10 mm thick and very hardy.

Manufactured from closed cell polyethylene, they are hard wearing, reusable and guaranteed to stay in prime condition for many years. The blankets can also be used to protect concrete slabs from excessive heat or wind - conditions that put the material at risk of evaporation and could see the moisture removed from the surface.

HEAVY DUTY / BITUMINOUS  PROTECTION BOARDS

We do a range of bituminous and heavy duty protection boards , from 3mm up to 6mm thick . Our protection boards can be used on waterproofing membranes , to protect against backfill materials and to protect against reinforcement positioning. The protection boards have excellent puncture resistance , are non compressive and rot proof.

Antinox 2mm Protection Boards Black  For Floors & Doors

The Antinox heavy duty Protection Board is manufactured from fluted polypropylene to provide an impact resistant protective covering. Antinox Black has numerous applications on site including floor, wall and door protection. It is ideal for applications where flame retardant board is not required. Antinox board is a CFC free product.

Antinox 2mm Protection Boards Clear   For windows & Doors

Fluted polypropylene board ideal for applications where flame retardant board is not required. Antinox has numerous applications on site including floor, wall and window protection. Antinox translucent grades are ideal for protecting windows whilst allowing light to pass through. Antinox Data Sheet .

Antinox 2mm Flame Retardant Board

Flame retardant fluted polypropylene board to LPS 1207 which is a widely used all purpose protection system. Durable, impact resistant and easy to handle, Antinox FR has numerous applications on site including floor, wall and window protection. Available in grades as listed. Antinox FR Data Sheet .

Steel Protection Paint   Can be used on wood, metal and concrete

EVERBUILD BLACK BITUMEN PAINT is a solvent based, full bodied black bitumen paint, When dry, the product forms an odourless and taint free bitumen film suitable for the protection of metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood against water attack. Bitumen Paint Data Sheet .

Reinforcement Safety Caps  To protect against  exposed rebars

Safety Caps are designed for use in the construction industry, and fit over the ends of protruding reinforcement bars reducing the risk of injury. These items are generally available for next day delivery if ordered before 1pm.

ORDER LINE 0800 047 6775

BBA Visqueen  1000/1200/2000g

Pifa Visqueen 1000/1200/2000g

Flame Retardent Polythene

ORDER LINE 0800 047 6775

Visqueen D/Sided Tape

D/Sided Visqueen Tape

Polythene Jointing Tape

ORDER LINE 0800 047 6775

Visqueen Vapour Check

Visqueen HP Vapour Barrier

Fully Bonded Vapour Barrier

ORDER LINE 0800 047 6775

Vapour Tapes

Hessian Rolls

Frost Mats

ORDER LINE 0800 047 6775

Antinox Protection

Flame Retardent Antinox

Bitumin Paint

Rebar Safety Caps

ORDER LINE 0800 047 6775

ORDER LINE 0800 047 6775